Configure the device using the ConnectPort LTS web interface Administration
Digi ConnectPort LTS User Guide
128
n Segments Retransmitted: Number of retransmitted segments. Segments are retransmitted
when the server does not respond to a packet sent by the client. A retransmit limits the
number of lost and discarded packets.
n Established Resets: Number of established connections that have been reset.
n Currently Established: The number of established connections that have been reset.
n Resets Sent: The number of sent resets.
UDP Statistics
n Datagrams Received/Datagrams Sent: Number of datagrams received or sent.
n Bad Datagrams Received: Number of bad datagrams received. This number does not include
the value contained by NoPorts.
n No Ports: Number of received datagrams that were discarded because the specified port was
invalid.
ICMP Statistics
n Messages Received: Number of messages received.
n Bad Messages Received: Number of received messages with errors.
n Destination Unreachable Messages Received: Number of destination unreachable messages
received. A destination unreachable message is sent to the originator when a datagram fails to
reach its intended destination.
n Messages Sent: Number of ICMP messages sent.
n Dest. Unreachable Messages Sent: Number of ICMPdestination unreachable messages sent.
n IPv6 Messages Received: Number of IPv6 messages received.
n IPv6 Bad Messages Received: Number of IPv6 messages received with errors.
n IPv6 Destination Unreachable Messages Received: Number of IPv6 destinations
unreachable messages received. A destination unreachable message is sent to the originator
when a datagram fails to reach its intended destination.
n IPv6 Messages Sent: Number of IPv6 messages sent.
n IPv6 Dest. Unreachable Messages Sent: Number of IPv6 destination unreachable messages
sent.
XBee Network
Use this section to view XBee module activity and detailed statistics. This information may aid in
troubleshooting network communication problems with your XBee network.
Gateway Device Details
This Gateway Device Details page displays the current PAN ID, channel, and gateway address used by
the XBee network.
Network View of the XBee Devices
Use the Discover XBee Devices button to refresh the list of devices that joined the XBee network.
(Note that the discovery operation may take a few seconds.) Click an entry in the device's table to