Digi One IAP

Digi One IAP Family
Digi One IAP and Digi One IAP Haz
User Guide

Digi One IAP Specifications

General

Brand	Digi
Model	One IAP
Category	Server
Language	English

Summary

Hardware information

Safety considerations and warnings

Precautions for safe operation and handling of the device.

Serial port and network protocol support

Configure the Digi One IAP using IA profiles

Serial bridge profile: master and slave connected to Digi ports

Modbus profile: serial-connected slave

Modbus profile: serial-connected master

DF1 profile: serial-connected slave

DF1 profile: serial-connected master

Omron family profile: serial-connected slave

Omron family profile: serial-connected master

Other serial port protocol profile: serial-connected slave

Other serial port protocol profile: serial-connected master

Configure a serial-connected slave: generic procedure

Configure a serial-connected master: generic procedure

Configure a serial-connected master: TCPUDP sockets

Configure a serial-connected slave: other IA protocol

Configure a serial-connected master: other IA protocol

Set up COM port redirection

Administration tasks

Log in as the Administrator

Steps for accessing the device as an administrator.

Update firmware

Procedures for upgrading device firmware via HTTP or TFTP.

Reset the Digi One IAP configuration to factory defaults

Reset the Digi One IAP from the web interface

Reset the Digi One IAP from the command line

Reset the Digi One IAP using the reset button