Need help?Do you have a question about the Digi ConnectPort LTS 16 and is the answer not in the manual?
General| Model | ConnectPort LTS 16 |
|---|---|
| Ethernet Ports | 1 |
| Operating System | Digi Embedded Linux |
| Flash Memory | 128 MB |
| Serial Ports | 16 RS-232/422/485 ports |
| Connectivity | Ethernet |
| Ethernet | 10/100Base-T |
| Memory | 128 MB RAM |
| USB Ports | 1 USB 2.0 |
Overview of ConnectPort LTS devices and their core functionality.
Describes the various interfaces for configuring and monitoring Digi devices.
Details on enabling/disabling network services for device security.
Explains the two modes for assigning IP addresses (Dynamic/Static).
Provides methods to verify IP address configuration works correctly.
Steps to access the device's web interface using a browser or utility.
Settings for IP addresses, network services, and advanced network options.
Instructions on how to connect to the device's CLI via telnet or SSH.
Overview of key commands for displaying info and managing connections.
Procedures for uploading, managing, and deleting files on the device.
Steps to restore the device to its original factory configuration.
Guide on using the LCD display for basic device configuration.
Procedure to restore factory defaults using TFTP or BOOTP server.
Compliance information regarding FCC standards for digital devices.
Warnings and precautions for safe use of wireless devices and the product.
To Next Page
