Need help?Do you have a question about the Digi One IA and is the answer not in the manual?
General| Model | Digi One IA |
|---|---|
| Serial Ports | 1 |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | 9-30 VDC or 9-24 VAC |
| Dimensions | 4.5 x 2.9 x 1.1 inches (114 x 74 x 28 mm) |
| Weight | 0.4 lbs (0.18 kg) |
| Data Transfer Rate | up to 230.4 Kbps |
| Type | Serial Server |
| Protocols Supported | TCP, UDP, Telnet, DHCP, SNMP |
| Connector Type | RJ-45 (Ethernet), DB9 (Serial) |
| Storage | Flash |
| Network | Ethernet |
| Operating System | Embedded Linux |
Overview of the Digi One IA device server, its industrial applications, and benefits.
Introduction to the Digi One SP device server, focusing on its compact design and cost-effectiveness.
Details methods like Setup, DHCP, and ARP-Ping for assigning an IP address to the device server.
Step-by-step guide for setting the IP address using the Digi Setup application.
Procedure to configure the device server for automatic IP assignment via DHCP.
Method for assigning an IP address by updating ARP tables and pinging the device.
Instructions for modifying an existing device server IP address using its web interface.
Procedure to verify the successful configuration of the device server's IP address.
Explanation of RealPort's function in enabling serial communication over TCP/IP networks.
Overview of the main tasks involved in setting up RealPort for com port redirection.
Detailed steps for configuring a device server's port to enable RealPort functionality.
Guide for installing the RealPort software on Windows NT, 2000, and XP systems.
How to configure the device server to provide TCP or UDP socket services to other network devices.
Procedure to set up the device server for automatic TCP connections to network hosts.
Steps to configure the device server for initiating UDP communications to network hosts.
Instructions for establishing a serial tunnel between two serial devices using Digi device servers.
Guide to changing the default root password for enhanced device security.
Process for updating the device's firmware using HTTP or TFTP protocols.
Procedure for upgrading the device's POST (Power-On Self-Test) code, if required.
Methods for restoring the device's configuration to its original factory default settings.
Instructions for backing up and restoring device configurations using a server.
How to view detailed statistics and current configuration for the device's serial ports.
Guide to accessing and interpreting network-related statistics for the device.
Explanation of the status indicated by each LED on the Digi One IA device.
Technical specifications for the Digi One IA, including physical dimensions and environmental ratings.
FCC compliance statement for the Digi One IA, detailing operating conditions and interference rules.
Description of the meaning of each LED indicator on the Digi One SP device.
Technical specifications for the Digi One SP, covering physical attributes and operating environment.
FCC Class A compliance statement for the Digi One SP, outlining operational requirements and interference.
Details the configuration options for MEI switches for different serial interface types.
Pinout information for the DB9 serial connector for EIA-232, EIA-422/485 full-duplex, and half-duplex.
Critical safety guidelines and warnings for handling and installing the device and associated wiring.
Contact details for Digi International, including website, email, and phone numbers.
To Next Page