Digi ConnectPort LTS8 User Manual

Configure the device using the ConnectPort LTS web interface Configuration through the web interface
Digi ConnectPort LTS User Guide
47
n SMTP Settings:
l EnableSMTP service: When enabled, the Digi device can send an email notification when
an alarm occurs.
l SMTP server name: IP address or DNS name of the SMTP server.
l SMTP with authentication: Choose this option if your SMTP server requires a user name
and password.
l SMTP without authentication: Choose this option if your SMTP server does not require a
user name and password.
l POP before SMTP: Choose this option if you want to access your SMTP server after you
successfully log in to POP service.
l SMTP user name: The user name for your SMTP (or POP) server.
l SMTP password (new)/(confirm): The password for your SMTP (or POP) server.
l Device mail address: The email address used to send alarms. Most SMTP servers check
the sender's email address with the host domain name to verify the address as authentic.
Consequently, when assigning an email address for the device email address, any arbitrary
username with the registered hostname may be used. An example is
username@company.com.

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English