Digi SM-5100 - INTERFACE; PC INTERFACE

SM – 5100 Operation Manual
31
4.3 Department file
Department file is used for categorizing Main Groups. Department Number between 1 ~ 99 are
available for programming. The Main Groups that are not linked to any Department will be
assigned to Department Number 97 automatically. Maximum 16 characters per file are available
and each with 1 line.
4.3.1 Program Department File
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[2] or [X]、[︾]
S2
→
DEPT
FILE
Select Department
Programming.
[*]
S2.0
DEPT
0
NO SET
＄/kg window displays DEPT.
code.
[1]
S2.0
DEPT
1
NO SET
Enter department No.(Ex. [1])
[*]
S2.1
DEPT
NAME 0
Enter department programming,
set the department name.
[M][E][A][T]
S2.1
DEPT
MEAT
NAME 4
Enter DEPT. name(use letter
keys)(Ex. “MEAT” for Dept. No
1)
The methods of ASII letter input
refer to 3.23 ASSII Character
Input Method.
[PLU]
S2
→
DEPT
FILE
Store the department file, back
to S mode.
Note1: Number after "NAME" in Total display shows the position of the cursor.
Note2: The DEPT. No.1 to No.99 are available for programming.
(No.97 is default No. for PLU programming, and the PLUs which are not linked to any DEPT No. are
assigned to No.97)
(Non-PLU files (Weighing items) are assigned to DEPT code No.98)
(Non-PLU files (Non-weighing items) are assigned to DEPT code No.99)
Note3: The Department names programmed are not printed on the label/receipt but are for reporting.