Digi SM-5100 Service Manual

Service Manual
Model : SM -5100
July，2009 2nd Version
SHANGHAI TERAOKA ELECTRONIC CO., LTD
SERVICE AND SUPPORT DEPT.
3rd Floor of 2nd Building, Jia Yuan Business Center,
51# Long Wu Road, Shanghai China 200232.
TEL : +86-21-6408-5151 FAX : +86-21-6408-3468
EMAIL ADDRESS :steservice@digi-scale.com
All manuals and user guides at all-guides.com
all-guides.com

Digi SM-5100 Specifications

General

Print Resolution	203 dpi
Display	LCD
Interface	Ethernet
Print Technology	Direct Thermal
Supported Barcode Types	Code 39, Code 128, Codabar
Supported Media Types	Labels, Tags
Media Thickness	0.06-0.2 mm
Operating Temperature	5 to 40°C
Storage Temperature	-20°C to 60°C

Summary

GENERAL

KEY DEFINITIONS

Explains the specific functions assigned to each key on the scale.

SPECIFICATION

CALIBRATION

CALIBRATION OPERATION

Step-by-step guide for performing scale calibration procedures.

SOFTWARE SETTING

SOFTWARE VERSION UPGRADE

Methods and steps for updating the scale's software via Ethernet or RS232C.

RS232C UPDATE METHOD

Detailed instructions for updating scale software using RS232C connection.

SPECIFICATION SETTING

Procedures for modifying scale specifications through software.

INTERFACE

PC INTERFACE

Connecting the scale to a PC using Ethernet or RS232C interfaces.

SCALE ETHERNET ADDRESS

SCALE IP ADDRESS

CONNECTION METHODS

Explains RS232C, Ethernet, and wire configurations for connectivity.

ERROR MESSAGE

SM5100 FATAL MESSAGES

Lists fatal error messages and their potential causes for the SM5100.

TRACEABILITY SETTING

PROGRAMMING PROCEDURES

Steps for programming country, hall, breed, and traceability data.

DATA FORMATTING AND PLU

PC-FL1 OPERATION

HARDWARE LINK AND OPERATION

Details PC-Scale connection via RS232C and software operation.

DATA TRANSFER