SM 5100 TRACEABILITY SETTING
DISPLAY
OPERATION
TARE lb
＄/lb ＄
REMARK
[*][R][C][D] S37.8 R-CD RCD NAME 3 Program R-CD content “RCD”
[*][G][T][I][N] S37.9 GTIN GTIN NAME 4 Program GTIN content “GTIN”
[*][L][O][T] S37.10 LOT LOT NAME 3 Program LOT content “LOT”
[*][1] S37.11 TRACE 1 KIND Choose kind No. 1
[*][1] S37.12 TRACE 1 CATEG Choose category No. 1
[*][1] S37.13 TRACE 1 BREED Choose breed No. 1
[*][C][O][N][T] S37.14 CONT CONT NAME 4 Program cont content “CONT”
[*][0][6][0][3][1][0] S37.15 TRACE 060310 EAT D Program eat by date “06/03/10”
[*][5][0][0][0] S37.16 TRACE 5.000 WEGHT Program maximum weight “5kg”
[*][S][C][D] S37.17 S CD SCD NAME 3 Program S CD content “SCD”
[*][S][N][M] S37.18 S NM SNM NAME 3 Program S NM content “SNM”
[*][S][A][D][1] S37.19 S AD1 SAD1 NAME 4 Program S AD1 content “SAD1”
[*][S][A][D][2] S37.20 S AD2 SAD2 NAME 4 Program S AD2 content “SAD2”
[#] S37
Æ
TRACEA
BILITY
Save traceability No. 1
Free Format Programming
z Enter “S12 Æ FREE FORMAT”, press [*]
z Edit the correlative items for traceability in free format
PLU ITEM Programming
z Enter “S19 Æ PLU ITEM”, press [*]
z Set “ Item TRACE” to “PROGRAM” and press [#] to save
PLU Programming
z When you edit PLU, set “S1.64 PLU” to “TRACE ALLOW” and press [*]
z Input traceability number and press [#] to save
z In the end, when you call the PLU and print label, you’ll see the traceability information on the label
51
To Next Page
Loading...
