EasyManua.ls Logo

Digi DP-5000 - User Manual

Digi DP-5000
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
COPYRIGHT © 2010 TERAOKA WEIGH-SYSTEM PTE LTD
SERVICE MANUAL
PC SCALE PRINTER
DI-5000
DP-5000
DPS-5000
Edition 2
(Doc. No. SER-SM-072)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Digi DP-5000 and is the answer not in the manual?

Digi DP-5000 Specifications

General IconGeneral
Print Resolution203 dpi
Power Requirements100-240VAC, 50-60Hz
Print TechnologyDirect Thermal
Maximum Print Width4.09 inches
ConnectivityUSB, Serial, Ethernet
Supported Barcode TypesCode 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Data Matrix, PDF417, QR Code
Supported Media TypesLabels, Tags

Summary

2. Key Sheet and Display

2.1 Key Sheet Layout And Key Function

Explains the layout and function of each key on the scale's keypad for operation.

2.2 Operator Display Indicator Layout

Details the layout and usage of various indicators and areas on the operator display screen.

5. Initial Setup

5.3 Software Setup

Guides through initial software configuration, including country, user, module, and scale specifications.

6. System Setup

6.1 Network Setup

Covers configuring network parameters like IP address, MAC address, and WLAN.

7. Hardware Test and Maintenance

7.1 Printer Test

Describes procedures for testing printer sensors, calibration, and thermal head functionality.

7.2 Database Maintenance

Covers database operations like initialization, backup, restore, loading defaults, and migration.

7.3 Hardware Test

Details how to perform hardware tests for input, USB, RS232, and Ethernet interfaces.

7.7 Maintenance

Provides instructions for basic cleaning and dismantling of the thermal head unit.

8. Firmware Upgrading

8.1 Kernel

Outlines the process for upgrading the kernel firmware using Hyper Terminal.

8.2 PC Scale Application

Explains how to upgrade the firmware using an FTP client and PC scale application.

8.3 Printer Firmware

Details the procedure for reading and updating the printer's firmware version.

9. Major Part Disassembly

9.3 Disassembly of CPU Board, Inverter Board, Touch Relay Board and Display LCD

Details the disassembly of key internal electronic boards and the display unit.

12. Port Pin Configuration and Cable

13. Specification List

13.1 W&M SPEC

Lists detailed specifications for Weigh & Measure (W&M) functions, including scale, tare, and price parameters.

13.2 Printer SPEC

Provides detailed specifications for the printer, including paper handling, speed, and adjustments.

13.3 User SPEC

Covers user-configurable specifications like barcode, communication, label, receipt, and settings.

13.5 Scale SPEC

Details scale-specific parameters for price, tax, and operational modes.

Related product manuals