DI-5000_DP-5000_DPS-5000 Service Manual Edition 2
64
7.4 Touch Screen Calibration
Procedure Picture
1) In Registration mode, select [MENU] [MAINTENANCE]
[MAINTENANCE] [SERVICE ADVANCE] to go to
Service Advance maintenance mode.
2) Keying the Password and select [ENTER] button.
Password: 0953
3) In Service mode, touch [TOUCH SCREEN
CALIBRATION].
4) Touch the [Circle point] at left side top corner and press
key button. (Alternatively, press and hold inside the
circle for 3 seconds to continue).
To Next Page
Loading...
