Digi DP-5000 - Module SPEC

DI-5000_DP-5000_DPS-5000 Service Manual Edition 2
26
5.3.3 Module SPEC
Procedure Picture
1) In Registration mode, select [MENU]  [MAINTENANCE]
 [MODULE SPEC].
2) Enter the Password and press [PLU] key button.
Password: 2689
3) In MODULE SPEC mode, select the desired SPEC option,
e.g. [E_LABEL & HI-TOUCH].
Note:
Refer to Section
5.5.5.1 on SEARCH function procedures:
4) Touch the column and enter new setting or touch the
icon to select the new setting. Then touch [SAVE] button
to save the changed setting.