Digi DP-5000 - Printer SPEC

DI-5000_DP-5000_DPS-5000 Service Manual Edition 2
107
Slovakia
142E020 Allow PLU Tare Override One Touch Tare
0: Inhibit
1: Allow
142E021 Allow PLU Tare When There is Weight on Platter
0: Inhibit
1: Allow
142E027 Weight Stability Condition
0: Loose
1: Normal
2: Strong
3: Very Strong
142E030 Unit Price Masking for US requirement
0: Inhibit
1: Allow
142E031 Scale Resolution
0: 1/3000
1: 1/6000
2: 1/7500
142E036 Audit Trail
0: Enable (DP-5000 default)
1: Disable (DPS-5000 default)
142E037 Calibration Method
0: Full Span
1: Partial Span
13.2 Printer SPEC
143A002: PAPER WIDTH (IN DOTS)
(0 – 640 Default 576)
143A003: PAPER LENGTH (IN DOT)
(0 – 2000 Default 950)
143A004: GAP LENGTH (IN DOT)
(0 – 40 Default 28)
143A005: BACK FEED LENGTH FOR LABEL FROM PEEL TO THERMAL (IN DOTS)
(0 – 160 Default 80)
143A006: PRINTING SPEED
0: 100 mm/s
1: 110 mm/s
2: 120 mm/s
3: 130 mm/s
4: 140 mm/s
5: 150 mm/s
143A007: PRINTING ADJUSTMENT
0: Plus
1: Minus
143A008: AMOUNT OF ADJUSTMENT IN DOTS
(0 – 40 Default 00)