DI-5000_DP-5000_DPS-5000 Service Manual Edition 2
108
143A009: BACK FEED FUNCTION FOR GAP LABEL PRINTING
0: Disable
1: Enable
143A010: MARK FLAG
0: Disable
1: Enable
143A011: PRINTING DENSITY
0: High
1: Medium High
2: Medium
3: Low
143A013: FORWARD FEED LENGTH AFTER PRINTING FOR NO GAP PAPER (IN DOTS)
(0 – 400 Default 160)
143A016: PRINTER 1 LABEL/RECEIPT CONTROL
0: By Sensor
1: By Key
143A017: PRINTER INITIAL STATE (LABEL/RECEIPT) -- BY KEY
0: Receipt
1: Label
143A019: CONTINUOUS LABEL
0: Yes
1: No
143A021: BACK FEED LENGTH FOR NO GAP LABEL (IN DOTS)
(0 – 240 Default 160)
143A022: BACK FEED LENGTH FOR RECEIPT (IN DOTS)
(0 – 240 Default 160)
143A025: FORWARD/BACK FEED DOTS FOR CONTINUOUS PRINTING (PEEL <=> CUT)
(0 – 160 Default 160)
143A026: THERMAL HEAD DIAGNOSIS
0: Disable
1: Feed
2: Feed + Dynamic
To Next Page
Loading...
