SM – 5100 Operation Manual
46
Enter PLU programming.
Enter unit price.(Ex.5.80＄/kg)
Change Unit price of PLU 200
to non-weighing item.
Select Label format for 1
st
Label
by press [<<] or [>>] key.
(T1~T12,S,A,B,C,F1~F8 is
available)
Set the Label format (Ex.T6) by
press [6] or[>>] key.
Select Label format for 2
nd
Label
by press [<<] or [>>]key.
(F1~F8 only)
Enter commodity name.(Ex.
“CAKE”)
Enter the 2
nd
line of comm ddity
name.
Select the type of BARCODE by
press [X] or [>>].(EAN or ITF)
Select barcode format by press
[<<] or [>>]
key.(Ex.2f5c4i4wD)
Set flag data.(Ex.29)
The Default Flag Data can be set
at SPEC 3 ~ 6 and the Flag data
consists of one or two digits,
which depends on the selected
Barcode type.
Enter item code.(Ex.20020)
No appended item code of PLU
To Next Page
Loading...
