Digi SM-5100 - Page 58

SM – 5100 Operation Manual
58
4.9 Shop Name File
Shop Name data will be printed on Label or Receipt can be programmed in this file. The maximum
number of characters possible to enter varies according to the size of print area or character size
entry. Up to 32 Shop Names can be programmed with each 3 lines as maximum and number of line
is depends on the Character Size entry.
The default Shop Name print on label can be set at SPEC 46 & print centering of shop name on
label can be select at SPEC 250 and default Shop Name print on Receipt can be set at SPEC47 &
printing position can be select at SPEC251.
4.9.1 Program Shop Name File
At Programming Mode, select Shop Name programming mode and then enter new Shop Name
number (Ex. 1) programming mode.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[5] or [︾] four times
S5
→
SHOP
NAME FILE
Shop name File mode is MENU
5 in S mode.
[*]
S5.0
SHOP
0
NO SET
Enter Shop Name File
programming mode.
[1][*]
S5.1
S01.01
S1 A 100
Enter shop name code.(Ex.No.1)
[SIZE][D][I][G][I][SP
][S][H][O][P]
S5.1
S01.10
SHOP
S2 A 76
Press [SIZE] key to change font
size of the shop name.
Enter the shop name .(Ex. “DIGI
SHOP”)
[*]
S5.1
S02.01
S1 A 100
Program 2
nd
line of this shop
name.
[T][E][L][:]……
S5.1
S02.13
S1 A 88
Enter shop name for the 2
nd
line.(Ex. “TEL:57234888”)
[PLU]
S5
→
SHOP
NAME FILE
Store Shop Name File 1,Back to
S mode.