Digi SM-5100 - Page 67

SM – 5100 Operation Manual
67
4.14 Ingredient File
Ingredients data programmed in this Master Ingredient file can be printed on the Free Format
(F1-F99) with ingredient print area. The size of print area will decide the numbers of lines and
characters of every line. Maximum 15 lines can be programmed for each Master ingredient data
and up to 16 Master Ingredients data can be programmed in this file.
Note: Maximum 39 lines can be programmed for each Master Ingredient data when SPEC 43 set to 0.
4.14.1 Program Ingredient File
At Programming Mode, select Ingredient programming mode and then enter new Ingredient
number (Ex. 1) programming mode. *For edit, enter existing Ingredient number.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[10] or [ ︾ ] nine
times
S10
→
INGR
FILE
Select Ingredient file
programming mode.
[*]
S10.0
INGR
0
NO SET
Enter Ingredient File
programming mode.
[1][*]
S10.1
G01.01
S1 A 100
Enter the Ingredient File
No.1.(Ex.No.1)
[S][U][G][A][R]
S10.1
G01.06
SUGAR
S1 A 100
Enter the Ingredient File as the
same procedures as Commodity
Name Entry.
(Ex. “SUGAR”)
[SIZE]
S10.1
G01.06
SUGAR
S2 A 95
Press [SIZE] key to change font
size of the Ingredient File.
[*]
S10.1
G02.01
S1 A 100
Program 2
nd
line of this
Ingredient File.
[F][L][O][U][R]
S10.1
G02.06
FLOUR
S1 A95
[PLU]
S10
→
INGR
FILE
Store Ingredient File 1,back to
S mode.