Digi SM-5100 - Page 70

SM – 5100 Operation Manual
70
4.15 Text File
Maximum 20 Texts are available (Text 1~16 are for Item label and text 17~20 are for Total
label). Text is used for printing the fixed data on label such as “Unit Price”, “packed date”. Text
cannot be printed when using standard format since they do not have any text print area set.
You must use a Free Format with a Text print area programmed. Maximum 2 lines per text can
be programmed and number of line is depends on the size of print area of the selected label format
or Character Size entry.
Note: Print Text 5 to 16 on Total label can be set at SPEC 332 setting.
4.15.1 Program Text File
At Programming Mode, select Text programming mode and then enter new Text number (Ex. 1)
programming mode. *For edit, enter existing Text number.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[11] or [︾] ten times
S11
→
TEXT
FILE
Select Text file programming
mode.
[*]
S11.0
TEXT
0
NO SET
Enter Text File programming
mode.
[1][*]
S11.1
T01.01
S1 A 100
Enter the Text File
No.1.(Ex.No.1)
[P][A][C][K][A][G][
E]
S11.1
T01.08
CKAGE
S1 A 93
Enter the Text File as the same
procedures as Commodity
Name Entry.
(Ex. “PACKAGE”)
[SIZE]
S11.1
T01.08
CKAGE
S2 A 78
Press [SIZE] key to change font
size of the Ingredient File.
[SIZE]…[SIZE]
S11.1
T01.08
CKAGE
S5 A 53
Change font size to S5.
(S1~S5; M1~M5; L1~L5)
[*]
S11.1
T02.01
S1 A 56
Program 2
nd
line of this
Ingredient File.