Digi SM-5100 - Page 96

SM – 5100 Operation Manual
96
4.20 Tax File
This function enables you to program consumption tax rate included or excluded in the price.
Up to 10 Tax Numbers (1 - 10) can be programmed. The programmed Tax rates (Tax Number)
that are linked to a Main Group will apply for all PLU's in that Main Group or set the Tax
Number in individual PLU File. Tax Rates can be entered between 00.00 % - 99.99 %. To enable
TAX programming mode, SPEC 603 must set to 1 (TAX) in advance.
There are two types of Taxes:
 ADD ON TAX: Tax is added to the Total Price.
 VAT TAX: Tax is included in the Total Price.
Note: If you want print PRICE WITH TAX on Item Label, the selected label format must has print area
for Price + Tax and SPEC 659: SELECTION OF ITEM PRICE PRINTING must set to ITEM
PRICE AFTER TAX in advance.
4.20.1 Program Tax File
At Programming Mode, select TAX programming mode and then enter new Tax number (Ex. 1)
programming mode. *For edit, enter existing Tax number.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
S1
→
PLU
FILE
Enter S mode.
[1][8][*]
S18.0
TAX
0
NO SET
Enter Tax File programming
mode.
Enter Tax File number.(Ex. 1)
[1][*]
S18.1
TAX
0.00
INCLUDE
Enter default tax rate.(Ex.
3.00%)
[3][0][0]
S18.1
TAX
3.00
INCLUDE
Select tax type.
[<<] or [>>]
S18.1
TAX
3.00
EXCLUDE
Tax File 1 is value added tax.
[PLU]
S18
→
TAX
FILE
Store the Tax File 1 data, back
to S mode.
Note1: 0 % to 99.99 % are available for Default Tax Rate.
Note2: [<<] and [>>] key can change the tax type. (Include / Exclude)