Need help?Do you have a question about the Digigram IQOYA *SERV/LINK and is the answer not in the manual?
General| Network Interface | 2x Gigabit Ethernet |
|---|---|
| Audio Codecs | AAC |
| Form Factor | 1U rackmount |
| Protocols | SIP, RTP, HTTP, SNMP |
| Redundancy | Dual power supplies |
| Control | Web-based GUI, SNMP |
| Sample Rates | 32 kHz, 44.1 kHz, 48 kHz |
| Bit Depth | 16, 24 bits |
| Ethernet | 10/100/1000 Mbps |
| Dimensions | 44 mm (1.73 in) x 482 mm (19 in) |
| Weight | 4.5 kg |
Lists general features applicable to all 1U rack models of the IQOYA *SERV/LINK.
Details analog and AES/EBU input/output specifications for specific IQOYA *SERV/LINK models.
Outlines specifications for IQOYA *SERV/LINK models featuring AES/EBU interfaces exclusively.
Describes the controls, indicators, and layout of the device's front panel.
Illustrates and details the rear panel connectors and ports of the IQOYA *SERV/LINK.
Explains how audio signals are received by and transmitted from the device.
Defines what constitutes an encoding or decoding program within the system.
Describes how audio programs are streamed and managed over an IP network.
Details the grounding procedure for safe and proper device installation.
Guides users on connecting audio interfaces and synchronization signals to the device.
Provides instructions for establishing a network connection for the IQOYA *SERV/LINK.
Organizes preference settings into categories like System, Services, Network, Auxiliary Data.
Groups menus for configuring audio inputs, outputs, and buses.
Covers defining and streaming programs and IP services.
Details the audio input/output specifications for analog and AES/EBU models.
Covers warnings regarding cabinet opening, power, humidity, and installation location.
Provides instructions for cleaning and moving the device safely.
To Next Page
