Digigram IQOYA *SERV/LINK - 1.3. IQOYA *SERV;LINK with AES;EBU only I;Os; 3. Physical interfaces; 3.1. IQOYA *SERV;LINK Front Panel; 3.2. IQOYA*SERV;LINK Back Panel

IQOYA *SERV/LINK user manual
1. KEY HARDWARE FEATURES
1.1. Features common to all IQOYA *SERV/LINK 1U racks
1.2. IQOYA *SERV/LINK with analog and AES/EBU I/OS (*SERV/LINK882, *SERV/LINK16162)
1.3. IQOYA *SERV/LINK with AES/EBU only I/OS (*SERV/LINK881, *SERV/LINK16161, 24241, 32321)
1.4. IQOYA *SERV/LINK with MADI I/OS (base version: *SERV/LINK88-MADI)
1.5. IQOYA *SERV/LINK for transcoding only
2. KEY SOFTWARE FEATURES
2.1. Standard features
2.2. Optional software features
Physical interfaces
3.1. IQOYA *SERV/LINK Front Panel
3.1.1. LEDs
3.1.2. LCD display and keypad
3.1.3. Navigating menus on LCD display
3.2. IQOYA*SERV/LINK Back Panel
3.2.1. Back panel for analog & AES/EBU version, and AES/EBU versions
3.2.2. Back panel for MADI versions
3.2.3. Back panel for AES67 versions
3.2.4. Back panel for AES67/MADI versions
3.2.5. Optional -48VDC power supply
4. IQOYA *SERV/LINK working principle
4.1. Audio inputs and outputs
4.2. Programs
4.3. IP services
4.4. Audio buses
5. INSTALLATION
5.1. Grounding the IQOYA *SERV/LINK
5.2. Connecting the audio I/Os and synchronization clocks
5.3. Connecting IQOYA *SERV/LINK to the network
5.4. Powering up IQOYA *SERV/LINK
5.5. Steps to follow to configure IQOYA *SERV/LINK
6. Note that IQOYA *LINK can simultaneously encode, decode, and transcode.
7. Accessing IQOYA *SERV/LINK WEB pages
8. Configuration from the WEB pages
2