DR5088RC DIGIDETECT 30.05.2019
P 4
www.digikeijs.com
1.2 Warranty provisions
All our products are covered by a 24-month manufacturer’s warranty. Please read this manual carefully. The warranty will be void in the event of damage to
the product caused by incorrect adherence to this manual.
CAUTION! Any warranty claims are void if the DR5088RC and/or the power supply housing are opened.
Please read the following points carefully before you start working with the DR5088RC.
Any warranty is void if the housing of the DR5088RC or of the power supply are opened.
When working on your track, the control unit must be switched o at all mes.
Never connect an external voltage or other digital system to the Track exit of the DR5088RC control unit.
This will damage the internal electronics in such a way that any warranty claims will be void. Even if this happens accidentally.
Always use ocial and approved cabling to prevent short circuits and damage.
Use the DR5088RC in a dry and dust-free environment
CAUTION!!!! NEVER connect the DR5088RC via USB while this is connected to the TRACK INPUT or vice versa!
The USB connecon may only be used to congure the DR5088RC without that being connected to your model
railway! When connecng both the USB and TRACK INPUT simultaneously, you will damage both the DR5088RC
and your Central Unit
1.3 Legal noces
All rights, changes, typing and prinng errors and delivery opons are reserved.
Specicaons and illustraons are non-commial and non-binding. All changes to the hardware, rmware and soware are reserved.
To Next Page
Loading...
General