Digikeijs DR5088RC DIGIDETECT User Manual

DR5088RC DIGIDETECT 30.05.2019
P 40
www.digikeijs.com
7.3 Rocrail
1. In the sensor sengs, besides the sensor address, specify the bus.
In the menu Tables / Sensors .. or by selecng the Properes item in the context menu of the sensor, go to the Interface tab In the Address secon of the Bus
window, specify the bus number
The bus number can be specied in the Sensor monitor table accessible from the Control menu.
In principle, this is sucient for the operaon of RailCom in Rocrail.
If you install a locomove on the rails, then it is detected by the program itself as a guest.
If you need to congure exisng locomoves in the database, you need to register in their properes Code @
In systems using LocoNet it is equal to the address, but it can also be specied in the Sensor monitor table accessible from the Control menu.

Digikeijs DR5088RC DIGIDETECT Specifications

General

Brand	Digikeijs
Model	DR5088RC DIGIDETECT
Category	Toy
Language	English