Digiop NVR-FlexVR 2U User Manual

1
Congratulations on your new DIGIOP® Video and Data Management System
This guide provides setup instructions for your server hardware.
For more information, contact DIGIOP® Support at
877.972.2522 Toll Free • support@digiop.com • www.digiop.com
www.digiop.com
DIGIOP® NVR and FlexVR 2U Chassis for Di32, DM16 Series Systems
DO_NVR-FlexVR-2U-H_CoQ
10/9/13
DIGIOP® NVR - FlexVR™ 2U
Hardware Quick Start Guide
Video and Data Management Systems

Digiop NVR-FlexVR 2U Specifications

General

Model	NVR-FlexVR 2U
Category	DVR
Brand	Digiop
Form Factor	2U Rackmount
Recording Resolution	Up to 4K
Operating System	Embedded Linux
Remote Access	Yes
Mobile Support	Yes
Network Interface	2 x Gigabit Ethernet
Power Supply	Redundant Power Supply
Video Input Channels	Up to 64 IP Channels

Summary

Getting Started

Unpacking the Contents

Lists included system components for inspection during unpacking.

Choose a Proper Location

Selects an appropriate location based on ventilation, power, and environmental factors.

Site Installation

Details hardware setup and connection order for input devices and peripherals.

About Your System

Front View

Identifies and describes components visible on the front panel of the chassis.

Back View and Ports

Details the various ports and connectors located on the back panel.

Expansion Cards

Discusses the presence or absence of expansion cards in different chassis models.

Setting Up Your System

Monitor Connection

Connects the monitor using DVI-I/DVI-D ports or the DisplayPort.

Network and Peripheral Connection

Connects the network cable and essential peripherals like keyboard and mouse.

Video Input and Power On

Connects video input for DM16 systems and powers on the system.