Need help?Do you have a question about the Digiplex EVO48 and is the answer not in the manual?
General| Brand | Digiplex |
|---|---|
| Model | EVO48 |
| Category | Security System |
| Language | English |
Details the features of the EVO48 control panel, including combus, zones, and PGM outputs.
Lists the features of the EVO192 control panel, highlighting expansion capabilities.
Provides technical specifications for the control panel, including AC power, battery, and outputs.
Step-by-step guide for installing the system, including module and keypad connections.
Guidance on selecting an appropriate location for the control panel, considering ventilation and accessibility.
Details on connecting the AC power transformer and requirements for UL listed systems.
Information on connecting the 12Vdc rechargeable backup battery and its polarity.
Information on using WinLoad software for programming the control panel.
Instructions for using the Paradox Memory Key to copy and download programming.
Guide to programming the system directly through a keypad interface.
Methods for programming zones, including section [0400] and using serial/input numbers.
Procedure for assigning addressable devices or hardwired inputs to zones.
Automatically arms the selected partition daily at a set time with an exit delay.
Step-by-step guide for installing the VDMP3 voice module onto the EVO control panel.
Configuration steps for the VDMP3 module, including voice reporting and phone number setup.
Resets the control panel to default settings, retaining Panel ID and PC Password.
Resets specific parameters or sections to default values or pre-defined programming.
Sets and manages the 6-digit installer code for system programming and access.
Sets the 6-digit System Master Code for comprehensive system management.
Steps for upgrading the control panel or module firmware using WinLoad.
To Next Page
