To Next PageTo Next PageWhat to do if I can't access the internet on my Digisol Network Router even when the ADSL indicator is on?
If the ADSL indicator is lit but you still can't access the internet, double-check that you've correctly entered your VPI, VCI, username, and password in the router's settings.
Why is there no proper LAN connection indication on my Digisol Network Router?
A missing LAN connection indication may be due to several factors. First, check the connection between your device and the PC, hub, or switch. Verify the operational status of the computer, hub, or switch. Inspect the cables linking the device to other devices. Try using a cross-over cable to connect directly to a computer or a straight-through cable for connections to a hub or switch.
How to fix Digisol Network Router when I cannot access the web page?
If you're unable to access the web page, first, go to Start > Run on your desktop. Then, in the DOS window, enter 'Ping 192.168.1.1' to test the connection (192.168.1.1 is the default IP address). Also, check the type of network cable you are using, verify the connection between the device and your computer, and ensure that the TCP/IP properties of your computer's network card are correctly configured.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 300 Mbps |
| Firewall | SPI Firewall |
| Ports | 4 x 10/100 Mbps LAN ports, 1 x 10/100 Mbps WAN port |
| Security | WEP, WPA, WPA2 |
| Operating Modes | Router, WISP |
| Antenna | 2 x 5 dBi external antennas |
