Digital-Ally FirstVu HD One - Mode Status Indicators

FirstVu HD One™ Operation Guide 860-00260-00 Draft 02
Digital Ally, Inc. | Status Indicators
25
Status Indicators
LED Status indicators are used to indicate the operational status of the FirstVu HD One. The
status indicators are located on the top of the camera module and main module.
Normal Mode
Red
Blue
Yellow
Power and Record
Powering On
-
Alternating Flash
Event Recording
On
-
-
Standby or Standby
Pre-Event
Off
-
-
Memory Alerts
15 minutes remaining
-
-
1 flash /
5 seconds
Battery Alerts
15% Charge
remaining
-
2 flashes /
5 seconds
-
Charge in Progress
-
Flash
-
Charging Complete
-
On
-
Data Transfer
Transfer in Progress
-
-
Flash
Transfer complete
-
-
On
VuLink
Connected with
VuLink
-
-
On
Error
-
3 flashes / 5 seconds
When in a Data Transfer stage, wireless communications with VuLink are automatically
disabled. This prevents an accidental recording while docked.
* VuLink is a secure wireless gateway which allows your FirstVu HD One to interface with
your vehicle’s input triggers. Contact Digital Ally, Inc. at 1-800-440-4947 for more
information.