DIGITAL DELAY Elite 95 - User Manual

1
2036 Fillmore Street
Davenport, Ia. 52804
563-324-1046
www.racedigitaldelay.com
Elite 95
WARRANTY AND DISCLAIMER
DIGITAL DELAY ELECTRONICS INC. WARRANTS THE PRODUCTS IT
MANUFACTURES AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP
FOR A PERIOD LIMITED TO 1 YEAR FROM THE DATE OF SHIPMENT,
PROVIDED THE PRODUCTS HAVE BEEN STORED, HANDLED, INSTALLED,
AND USED UNDER PROPER CONDITIONS.
The company’s liability under this limited warranty shall extend only to the
repair or replacement of a defective product, at the company’s option. DIGITAL DELAY
ELECTRONICS INC. disclaims all liability for any affirmation, promise, or representation
with respect to the products.
The customer agrees to hold DIGITAL DELAY INCORPORATED and
DIGITAL DELAY ELECTRONICS INCORPORATED harmless from, defend, and
indemnify DIGITAL DELAY INC. and DIGITAL DELAY ELECTRONICS INC. against
damages, claims, and expenses arising out of subsequent sales of or use of DIGITAL
DELAY ELECTRONICS INC. products, or products containing components
manufactured by DIGITAL DELAY ELECTRONICS INC. and based upon personal
injuries, deaths, property damage, lost profits, and other matters which BUYER, its
employees, or sub-contractors are or may be to any extent liable, including without
limitation, penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and
liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 93-
637), as now in effect or as amended hereafter.
No warranties expressed or implied, are created with respect to the company’s
products except those expressly contained herein. The customer acknowledges the
disclaimers and limitations contained and relies on no other warranties or affirmations.

DIGITAL DELAY Elite 95 Specifications

General

Brand	DIGITAL DELAY
Model	Elite 95
Category	Control Unit
Language	English

Summary

Warranty and Disclaimer

Features and Specifications

The Terminal Strip

+12 VDC Terminal

Connects to a switched +12 Volt source.

Transbrake Terminal

Connects to the Transbrake solenoid and 2-Step if used.

Throttle Stop Terminal

Connects to the Throttle Stop solenoid.

Ground Terminal

Connects to the chassis ground.

PB-1 Terminal

Connects to Push-button 1 for primary delay control.

PB-2 Terminal

Connects to Push-button 2 or Tap Up/Down.

Tap Terminal

Connects to Tap Up/Down Push-button.

The Keypad

Setting Dial-In Times

Setting Delay Times

Setting and Displaying the Delay

Tap Up;Down Information in PB Mode 2

Displays Tap Up/Down information for Push-button Mode 2.

Tap Up;Down Information in PB Modes 1, 3, and 4

Displays Tap Up/Down information for Push-button Modes 1, 3, and 4.

Push-button Operation Modes

Push-button Mode 1

Single button for one hit at the tree.

Push-button Mode 2

Two buttons for two hits at the tree.

Push-button Mode 3

One button for two sequential hits at the tree.

Push-button Mode 4

One button for two hits; second hit cancels first.

Setting Push-button Mode and Interrupt Time

Push-button Interrupt Time

Safety feature disabling buttons after vehicle leaves.

Understanding the How Late

Understanding the Drivers Reaction Tester

Understanding and Connecting a By-pass Push-button

Explanation of the 4-Stage Timer

Setting Stage 1 and 2 Times

Procedure to set new stage times for Stage 1 and 2.

Setting Stage 3 and 4 Times

Procedure to set new stage times for Stage 3 and 4.

Setting Throttle Mode

Configures throttle stop output for stages.

Explanation of the Starting Line Enhancer

Setting the Starting Line Enhancer Mode

Sets the mode for the Starting Line Enhancer feature.

Mounting the Unit

Wiring the Unit