Web Power Switch 7
9
features. Other users have limited access to outlets as assigned
by the administrator. When confi guring the power controller for the
fi rst time, use the default admin username and 1234 password.
The home page contains 13 external hyperlinks. The fi rst nine are
fi xed internal links: The four links in the lower left corner of the
screen are user-programmable.
Outlet Control
Clicking “Outlet Control” links to the home page used for
manually switching outlets on and off. Access to specifi c outlets is
determined by your login. Admin has access to everything.
Setup
The setup page lets you select outlet names, program web links,
startup delays, and the power loss recovery mode. You can also
change login credentials on this page.
Scripting
A scripting language using BASIC commands lets you
customize the power controller. Scripts may be started manually,
automatically on power-up, by external http commands, or by
Auto-Ping events. Find a full list of commands and example scripts
at: digital-loggers.com/scripting.html
Auto-Ping
The Auto-Ping link lets you set parameters to automatically reboot
attached equipment. First specify an IP address to ping. Next
adjust the timing settings and use the checkboxes to link the IP to
specifi c circuits. For example, if a router is unreachable, you may
choose to automatically reboot both a router and a switch on two
different circuits. Learn more: digital-loggers.com/auto-ping.html.
System Log
The power controller keeps a log of system events including logins
(successful and attempted), outlet switching, power interruptions,
and Auto-Ping events. Recent events are stored in the log and
To Next Page
Loading...