4.1.3. Display
Set the sequence dwell time, display output resolution, mouse cursor size and OSD display
options of the DVR.
Sequence
Set how long each channel will display when using the Sequence feature.
Display Resolution
The system supports the following kinds of resolutions:
• True HD: 2560x1440, 3840×2160 (4K), 1024x768, 1280x1024, 1920x1080
• VGA: Set the proper display output resolution for the display monitor; 1920x1080,
1024x768, 1280x1024
OSD
Select what information will appear over the display by checking the corresponding boxes.
Screen Saver
The screen saver feature protects the screen and data of the DVR by turning off the display
after a set time of inactivity. Set the screen saver’s waiting time for when the display output
will automatically turn off. Set in between 1 minute and 180minutes. If applicable, select to
log off the current user when the screen saver is on.
Channel Swap
Enable to allow swapping the camera channel positions in the viewing area with drag-and-
drop.
To Next Page
Loading...
