system will record when a sensor is triggered and motion is detected but neither sensor nor
motion detection alarms will be activated.
• In case the recording schedule is set to “CONT + MOT” or “MOT + SENS”, the
system records by continuous or motion detection mode in normal operation.
When motion occurs in the motion area or the alarm is activated, recording
mode will switch to recording as set by MOTION ALARM or SENSOR in the
EVENT menu.
• Dark Blue Color: The data recorded during DST (Daylight Saving Time) will be
indicated in dark blue color in the Intelli-search bar on playback mode.
Holiday Setup
Setup specific days as holidays to assign a special
recording schedule for those days. The system
supports up to 32 holidays.
Press the DATE button ( ) write a description, and
press ADD to save the data as a holiday.
Instant recording (emergency recording)
In the case of an emergency, the user enables instant recording by pressing the panic
recording button in the menu bar. The system will instantly start recording all the
channels with a full-frame rate at the maximum resolution regardless of the recording
mode setting. will appear in Live mode and a red-colored bar is shown in the
time search bar for video recorded by instant recording.
Emergency recording can only be toggled ON/OFF from the Tool Bar in Live view
Record 1fps Continuous with “CONT+” Mode
Check the box to set continuous recording to 1FPS when selecting “continuous + xx” modes.
Limit Emergency Recording Time
Set a limit to how long the system will record in emergency recording mode. Select from
30sec/60sec/90sec/2min/5min/10min.
To Next Page
Loading...
