EasyManua.ls Logo

DIGITECH Audio AM-4114 User Manual

DIGITECH Audio AM-4114
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2 Channel Wireless UHF Microphone System
With Individual Channel Level Control
AM-4114
User Manual
Question and Answer IconNeed help?

Do you have a question about the DIGITECH Audio AM-4114 and is the answer not in the manual?

DIGITECH Audio AM-4114 Specifications

General IconGeneral
BrandDIGITECH Audio
ModelAM-4114
CategoryMicrophone system
LanguageEnglish

Summary

System Specifications

Frequency and Range

Details the operating frequencies (CH1: 525.1MHz, CH2: 645.9MHz) and transmission range (60m).

Microphone and Dimensions

Specifies microphone power requirements (2 x AA) and pickup type (Dynamic), along with system dimensions.

System Components Identification

Receiver Front Panel

Identifies key components on the receiver's front panel, including antenna, outputs, power input, and controls.

Microphone Components

Highlights the power switch for the microphone, indicating its location and function.

Receiver Installation and Operation

Optimal Receiver Placement

Recommends placing the receiver at least 1m off the ground and away from speakers for best results.

Connection and Setup Procedure

Guides on connecting antenna, audio cables, power adapter, and initial power-up sequence.

Frequency Interference Caution

Warns against using multiple machines with the same frequency simultaneously.

Transmitter (Microphone) Operation

Battery Installation and Power

Details inserting AA batteries and switching on the microphone, noting the power light indication.

Signal and Volume Adjustment

Explains how to check for signal reception and adjust channel/system volumes for normal operation.