5
BASIC OPERATION:
CHARGING:
Mode: LED Indicator:
Power on LED Blue flash 1 second
Power off LED Red flash 1 second
Pairing mode LED Red & Blue flash alternately
Unconnected
standby mode
LED Blue flash once every 2 seconds
Connected stand-
by mode
LED Blue flash once every 5 seconds
Playing Music LED Blue flash once every 5 seconds
Talking LED Blue flash once every 5 seconds
Delete paired
record
Blue and Red LED flash once at the same time
Charging Solid LED Red
Full charged Solid LED Blue
Low battery Red LED flash
Charge the Bluetooth® Headset once when the Red LED flash. Charging time
about 2 hours. Solid Red LED changes to Solid Blue LED when fully charged.
Charge Connections:
Please connect to the Bluetooth® Headset charging port through the Micro USB
charging cable, the charger can be used as car charger, travel charger, computer
USB, etc.
Use of Charging Cradle:
Place the Bluetooth® Headset on the charging base, then connect the charging
base to USB charger through the Micro USB port for charging.
Note:
1. Please charge the Bluetooth® Headset at least one time every 3 months when
not in use.
2. Charging when Headset it is powered on, will reset it automatically and
power off.
To Next Page
Loading...