6
Q & A:
ON CALL FUNCTIONS:
1. How to reconnect and operation when failed to reconnect ?
When Bluetooth® Headset is connected with your device successfully for the
first time, it will search and reconnect the paired device automatically when
power on, If failed, please pair and connect again.
2. How to delete paired records?
When powered on, long press the volume + and the volume - button for 5
seconds to clear the pairing record. The indicator Blue and Red LED flash once
at the same time that means the pairing record has been cleared, and the
Bluetooth® Headset will not connect back to the connected device. When there
are various connection problems, try clearing the pairing record.
3. What’s the password for pairing?
Some connection devices require password for pairing, please try the following:
0000 or 8888 or 1111 or 1234.
4. What devices could charge for the headphone?
Any car charger, power bank, PC etc which meet DC 5V, charging current more
than 500mA could be charge for this item.
5. How to reset the headset?
Press MFB and plug the charge cable when powered on, it will reset the
headset and power off.
Calling function operation
• Short press the MFB to answer the new call and hang up the current call;
• Double press the MFB to answer the new call and keep the current call;
• Long press the MFB for 1 second to reject a new call while in current call.
• When you are on a three-party call, double press the MFB to switch audio
between the current call and the keep call.
To Next Page
Loading...