EasyManua.ls Logo

DigiTech HardWire series - Input and Output Jacks Explained

DigiTech HardWire series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
• supernova - Deep space reverb with twisting flange and pitch
shifting.
• shine - Shimmer reverb with a thick lush chorus added.
• pherb - Rich Lexicon Hall reverb with a hint of phasing.
• spring - The unmistakable classic ‘surf reverb.
6. Input 1 (Mono) - Connect your instrument, the output of a pedal, or
an amp effects send to this jack. Signals are heard at both outputs when
only the Input 1 (Mono) jack is used. This jack enables battery power to
the pedal when connected. To prolong battery life, disconnect the cable
from the Input 1 (Mono) jack when not in use. If the optional Harman
power supply is used, cables can remain connected.
7. Input 2 - Connect a second input to this jack for stereo operation.
Inputs 1 and 2 are processed separately through the Stereo Reverb
effect then fed to Outputs 1 and 2 keeping true stereo separation
between channels.

Related product manuals