12
Tap Tempo
The TR-7’s Foot Switch can be used as a Tap Tempo switch for setting the
tremolo effect’s modulation speed time during a live performance.
To access Tap Tempo, do the following:
1. Press and hold the Pedal Switch for 3 seconds. The effect first will turn
on and the Indicator LED lights solid BLUE (NOTE: If the effect was
already on, it will first turn off and then back on after 3 seconds).
2. After 3 seconds of holding the Foot Switch, the Indicator LED will
begin flashing BLUE indicating Tap Tempo mode is now active and the
LED flashes at the current modulation speed.
To Next Page
Loading...
