Need help?Do you have a question about the DigiTech RP80 and is the answer not in the manual?
General| Amp/Distortion Types | 11 |
|---|---|
| A/D Converter | 24-bit |
| Sampling Frequency | 44.1 kHz |
| Input | 1/4" instrument |
| Type | Multi-Effect Pedal |
| USB | No |
| Expression Pedal | Yes |
| Preset Memory | 40 user presets |
| Output | 1/4" |
| Power Supply | 9V DC |
| Effect Types | Over 100 effects including distortion, chorus, flanger, phaser, delay, reverb, and more |
Warnings about electrical shock, fire risk, and avoiding moisture for safe operation.
Details DigiTech's limited warranty, including registration, liability, and exclusions.
Diagram labeling the main controls of the RP80, including footswitches, buttons, and display.
Explains the function of the two footswitches for preset selection, tuner access, and bypass.
Describes how Value/Volume buttons adjust master level, effects, and drum machine parameters.
Details how to enter edit mode and navigate through effects using Edit buttons.
Advises turning off power and disconnecting before making connections, and how to turn off the RP80.
Guides on connecting the guitar to the RP80 input and output to an amplifier for mono use.
Illustrates connecting the RP80 for stereo output to two amplifiers or mixing console channels.
Explains setting pan controls for stereo separation and enabling Global Cabinet Modeling.
Describes the two power options: battery power and the PS200R DC power supply.
Provides instructions and a note on polarity for installing 6 AA batteries in the RP80.
Explains how to enter Tuner mode, play notes, and interpret LED indicators for tuning status.
Describes how to change the tuning reference and select alternate tunings.
Explains how to bypass presets for a clean tone and how to exit bypass mode.
Guides users on how to create or modify presets by selecting effects and adjusting parameters.
Outlines the steps to store modified settings to a User Preset location using the STORE button.
Explains how to use the Drum Machine for timing practice and control patterns, tempo, and level.
Details the procedure to enable Global Cabinet Modeling for amp models when using mixers or headphones.
Provides the procedure to reset the RP80 to its original factory settings, warning that user data will be lost.
Outlines the steps for recalibrating the Expression Pedal, especially after a factory reset or if it malfunctions.
To Next Page
