DigiTech HOT ROD User Manual

The Hot Rod Distortion is the world’s most advanced distortion pedal.
DigiTech’s exclusive AudioDNA™ technology is what makes the Hot
Rod much more than the standard distortion stompbox. Rather than
working from a single distortion circuit, the Hot Rod features a Morph
knob which lets you blend three independent distortion types. This
gives you a wider variety of different distortion tones that can be dialed
in quickly and easily.
1. Level Knob
Controls the effect’s output level. Turn this knob clockwise to increase
the output level, and counter-clockwise to decrease output level.
2.Tone Knob
Controls the boost or cut of high frequencies. Turn this knob clockwise
to increase the high frequency content, and counter-clockwise to
decrease the high frequency content.
3.AC Adapter Jack
Connect a DigiTech PS200R power supply to this jack. Use the proper
supply for your area’s Mains line voltage.

DigiTech HOT ROD Specifications

Power

power supply	9V Alkaline Dry Battery
power consumption	4.8 Watts
battery life	Approximately 4 hours

Electrical Specifications

input impedance	1 MOhms
output impedance	100 Ohms
optional power supply	PS200R - 100 (100V ~ 50/60Hz), 120 (120V ~ 60Hz), 230 (230V ~ 50Hz), 240 (240V ~ 50Hz)

Weight and Dimensions

dimensions	4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H)
weight	1.38 lbs.