The Hyper Phase is a multi-function phaser pedal that offers seven
different types of phasing effects and CIT™ cabinet modeling. The
following sections outline how the knobs and pedal functions work.
1. Speed Knob
Controls the speed of the phase shift sweep. Turn this knob clockwise
to increase the speed, and counter-clockwise to decrease the speed.
2. Depth Knob
Controls the depth of the phase shift effect. Turn this knob clockwise to
increase the depth, and counter-clockwise to decrease the depth.
3.AC Adapter Jack
Connect a DigiTech PS200R (9VDC output) power supply to this jack.
Use the proper supply for your area’s Mains line voltage.
4. Regen Knob
Controls the amount of regeneration (feedback) in the phaser effect.
Turn this knob clockwise to increase the regeneration, and counter-
clockwise to decrease the regeneration. When
4-RISE/FALL
is selected,
this knob creates a rising sweep when set between the minimum and 12
o’clock positions, and a falling sweep when set between the 12 o’clock
and maximum positions.
To Next Page
Loading...
