10
FREQUENCY MEASUREMENT
1) Set the function switch to the HZ% position.
2) Insert the black test lead banana plug into the negative COM jack.
3) Insert the red test lead banana plug into the negative VΩCAP jack.
4) Touch the test probes to the circuit being tested.
5) Read the frequency displayed on the screen.
MEASUREMENT SPECIFICATIONS
The following guide is based on an environmental temperature of 18-28°C and
humidity <70%.
RANGE RESOLUTION ACCURACY
40mV/60mV 0.01mV
±(0.5% reading + 5 digits)
400mV/600mV 0.1mV
4V/6V 0.001V
±(0.8% reading + 3 digits)
40V/60V 0.01V
400V/600V 0.1V
±(1.0% reading + 5 digits)
1000V 1V
DC VOLTAGE
Input impedance: 10MΩ; Max. input voltage: 1000V DC
To Next Page
Loading...