DigiTech VCS1 - VCS-1 Specifications; System Performance Specs; Input and Output Connectors; Side Chain I;O Specifications

VCS-1 SPECIFICATIONS
System Performance
Signal-to-Noise Ratio: > 102 dB, A weighted
Total Harmonic Distortion + Noise: < 0.1% typical, user-variable
Frequency Response: +0, -1 dB from <10 Hz to 35 kHz
+0, -3 dB from <10 Hz to 70 kHz
Inputs
Connectors: Female XLR and 1/4” TRS
(XLR pin 2 and TRS tip hot)
Input Impedance: 20 kΩ
Maximum Input Level: +21 dBu
Outputs
Connectors: Male XLR and 1/4” TRS
(XLR pin 2 and TRS tip hot)
Output Impedance: <100 Ω
Nominal Output Level: balanced or unbalanced: +4 dBu
Maximum Output Level: balanced or unbalanced: +21 dBu
Side Chain Send
Connector: 1/4” TRS (tip hot)
Type: Impedance balanced
Impedance: 1 kΩ
Max Output Level: +21 dBu
Side Chain Return
Connector: 1/4” TS
Type: Unbalanced
Impedance: >20 kΩ
Max Input Level: +21 dBu
Compressor
Threshold Range: -40 to +20 dBu
Ratio: 1:1 to ×:1
Threshold Characteristic: Soft or Hard knee
Attack/Release Modes: Manual or Auto
Manual Attack Range: 0.1 to 200 ms
Manual Release Range: 50 ms to 3 seconds
Auto Attack/Release Time: Variable, program dependent
•••
13 •••