When the radio is on,
Quickly press “AM BW/FM ST” button, LCD will display “--AUTO--” or”--MONO--”.
“--AUTO--” indicates FM Stereo mode; when tuning in a stereo station, STEREO
icon will be displayed.
“--MONO--” indicates FM Mono mode.
Quickly press “ AM BW/FM ST” button in sequence and LCD displays
“BW 6K, BW 4K, BW 3K,BW 2.5K,BW 2K,BW 1.8K,BW1K”.
Preset/Recall Memory - FM/LW/MW/SW
STEREO/ MONO/BANDWIDTH SELECTION
11
Each band can save 100 memories(P0~P99),total 10 pages (Page-00~
Page-09),each page can save 10 channels (PX0~PX9),”X” means page,
for example, if this station is in page-01, then 10 channels mean
P10~P19.
Preset Station
1)ATS - Automatic Tuning System, please see ‘TUNING IN STATION’
on Page 9;
2)Manual preset - select your desired band, quickly press “PAGE” button,
LCD displays “PAGE--00",then quickly press numeric button (0~9) to
select your desired preset page, hold down this numeric button for 2
seconds to save this station to one channel on this page, LCD displays
“PXX SAVE”. For example, If you want to save 107.5MHz to 1st channel
on 3rd page. Quickly press ‘PAGE’ button then #3 button, thereafter
hold down 1# button for 2 seconds. Then LCD displays “ P31 SAVE”.
There are two methods to preset station as under:
Recall Memory
Quickly press “PAGE” button, LCD displays “PAGE-XX”,then quickly
press numeric button (0~9) to select saved page, then continue
to press numeric button (0~9) to select saved channel on selected
page, so the LCD displays “PXX LOAD”,and so on.
FM Stereo/Mono
LW/MW/SW bandwidth selection
To Next Page
Loading...
