DigiTech WORLD BAND RADIO - Signal and Band Adjustments; Squelch Function

When the radio is on, select SW band, quickly press “SW/METER” button
to select different meter band as 120--90--75--60--49--41--31--25--22
--19--16--15--13--11" , LCD displays” MET XXM” corresponding.
SQUELCH FUNCTION
FM FREQUENCY RANGE SELECTION
SW METER Band
When the radio is on, hold down “SQUELCH “ button for 2 seconds.
LCD displays “SQUELCH OFF or 1~9", then rotate tuning knob to select
your desired squelch level (1~9) or “OFF” to shut down squelch function.
Quickly press “SQUELCH” button again to exit SQUELCH function.
When the strength of signal is lower than selected squelch level, the radio
will be mute automatically and LCD displays “SQUELCH”. VS “SQUELCH” will
not be mute
When the radio is off, hold down “FM” button for 2 seconds to enter selection,
Then quickly press this button to select FM range, The LCD displays as follows
by turn:
“FM--64,0M” indicates FM Range is 64~108MHz
“FM--87.5M” indicates FM Range is 87,5-108MHz
“FM--76.0M” indicates FM Range is 76~108MHz
Quickly press this button again to exit.
12
When the radio is off, hold down “0" button for 2 seconds, LCD displays,
“MW –-9K” then quickly press this button again to “MW --10K”. The factory
default is “MW--9K”.
MW 9/10kHz Selection