Need help?Do you have a question about the DigiTech XC-0328 and is the answer not in the manual?
General| Brand | DigiTech |
|---|---|
| Model | XC-0328 |
| Category | Weather Station |
| Language | English |
Lists all components included with the wireless thermo-hygrometer unit.
Suggests tools needed for installation and setup of the device.
Step-by-step instructions for setting up the remote thermo-hygrometer sensor.
Guide for installing batteries and setting up the main display console.
Explains the different segments and indicators on the display console's LCD.
Details how to verify the correct functioning and reception of sensors.
Describes the comfort icon based on humidity ranges and its display.
Explains the rate of change icon detecting rapid temperature and humidity shifts.
Details how to display and reset minimum and maximum temperature and humidity values.
Explains how to cycle through indoor and remote sensor channels.
Instructions on how to switch between Celsius and Fahrenheit temperature units.
Describes how to reacquire a lost sensor signal and its indication.
Offers advice to ensure reliable wireless communication between sensors and console.
Guides on how to calibrate the humidity reading to a known source.
Guides on how to calibrate the temperature reading to a known source.
Lists wireless transmission range, frequency, and update rate.
Details the measurement range, accuracy, and resolution for temperature and humidity.
Outlines the battery requirements for the base station and remote sensor.
To Next Page
