- 16 -
4.0 Basic Settings of the “EasyWeather” Software
After the “EasyWeather.exe” program has been started, the following main window will appear on the
PC screen:
All the settings from the base unit is mirrored into the PC software, so once you have done your setting
on the base unit, then you don’t need to make any setting changes on the PC software. However you
can still easily make any setting changes you wanted from the PC and download the changes into the
base station(the setting change will be refreshed when next full minute arrives on the base station).
When base unit is connected to PC, the icon of
will be displayed. If no base station is
connected, then
will be displayed.
Function button:
: display and setup system configuration
To Next Page
Loading...
