To Next Page

To Previous Page

- 8 -

Activate the indoor humidity related setting by

1)Touch the INDOOR HUMIDITY section again to set the indoor humidity high alarm function, the +,

ON/OFF and – button will be flashing, HI AL icon will light up. Touch the+ button or – button to

change the value, hold the+ button or – button for 3s to change the number in great step. Touch the

ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker icon will be turned on

indicating the alarm function has been enabled).

2)Touch the INDOOR HUMIDITY section again to set the indoor humidity low alarm function, the +,

ON/OFF and – button will be flashing, LO AL icon will light up. Touch the+ button or – button to

change the value, hold the+ button or – button for 3s to change the number in great step. Touch the

ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker icon will be turned on

indicating the alarm function has been enabled).

3)Touch the INDOOR HUMIDITY section the third time to display maximum indoor humidity record, the

recorded maximum value will be flashing, MAX icon will light up as well. Hold the maximum value for

3s, the maximum value will be reset to current reading.

4)Touch the INDOOR HUMIDITY section the fourth time to display minimum indoor humidity record,

the recorded minimum value will be flashing, MIN icon will light up as well. Hold the minimum value

for 3s, the minimum value will be reset to current reading.

Outdoor humidity

Procedures and settings are similar to Indoor humidity

Wind speed

Activate the wind related setting by

1)Touch the WIND SPEED section, + button and – button will be flashing. Touch the + button or –

button to Shift the display between Wind Average Speed and Gust Speed.

2)Touch the WIND SPEED section again, + button and – button will be flashing. Touch the + button or

– button to select wind speed unit between km/h, mph, m/s, knots, bft

3)Touch the WIND SPEED section the third time to set the high alarm function, the +, ON/OFF and –

button will be flashing, HI AL icon will light up. Touch the+ button or – button to change the value,

hold the+ button or – button for 3s to change the number in great step. Touch the ON/OFF button to

choose the alarm on or off (if alarm is enabled, the speaker icon will be turned on indicating the alarm

function has been enabled).

4)Touch the Wind SPEED section the fourth time to set wind direction alarm function, the wind direction

arrow will start to flashing. Touch + or – to select desired alarm for wind direction, press ON/OFF to

enable or disable the wind direction alarm.

5)Touch the Wind SPEED section the fifth time to display maximum wind speed record, the recorded

maximum value will be flashing, MAX icon will light up as well. Hold the maximum value for 3s, the

maximum value will be reset to current reading.

Rain

DigiTech XC0348 User Manual

Questions and Answers: