Loading Slides
Hold up the slide toward the light. Face the
trademark slide of the slide away from you. Look
through the slide and it should appear normally (not
a mirror image). Now turn the slide so the image is
upside down while looking at the same side.
Open the slide holder at the marked spot on the top.
With the slide holder laid open place the slide into
recessed area in the holder, the slide should fit
perfectly.
Close the slide holder and press the edges so that
it locks in plac
e. Hold it in the position as showing
and insert the Slide Holder into the slot on the right
side of the scanner.
Note: Handle slides and negatives with care. Dust,
scratches or finger prints will show up on your
saved images.
4 - EN
To Next Page
Loading...
