6.How to use the positive clip
a. Hold the positiveclipto the light, and place
the positive clip facing youcorrectly.
b. Remove the positive film holder, with the
silk-screened side facing up,
Open the positive clip, put it into the
installed positive clip, close the film
holder, and press the buckle tightly.
c. Insert the positive clip into the scanner
for scanning.
• Take care not to scratch or touch the image area when handling the positive clips (preferably
wearing gloves). If cleaning the positive c
lip, it is recommended to wipe the dust with a
compressed cotton cloth!
To Next Page
Loading...
