11
After Hours Mode Settings
Step 1) Monday thru Friday – Start Code 82 & End Time Code 83
Using military time as shown above, set this feature on by enter programming: press
and hold the Program Button for 3 seconds until you see “Program Mode”, then “Pick
Up Phone”, when the prompt for “Enter Code” displays enter 82, then enter the Start
time of day Ex. 1700, 5:00pm, display shows function. Next, when the prompt for
“Enter Code” displays enter 83, then enter your End time of day Ex. 0645, 6:45am,
display shows function.
Full Day After Hours Mode can be enabled when both Code 82 and Code 83 are the
same number. Ex. 0454, or 4:54am for Code 82 and 0454, or 4:54am for Code 83.
This setting leaves the After Hours Mode - On 24 hours a day. Use Code 88 in
programming to enable 24 hour After Hours Mode or Code 89 to disable 24 hour After
Hours Mode.
Step 2) Monday thru Friday – Enable Code 84 Disable Code 85
To enable Monday thru Friday, when the prompt for “Enter Code” displays, enter 84,
display shows function. To disable Monday thru Friday, when the prompt for “Enter
Code” displays enter 85, display shows function.
Step 3) Saturday & Sunday – Enable Code 86 Disable Code 87
If you want the same time interval to work during Saturday and Sunday, when the
prompt for “Enter Code” displays, enter 86, display shows function. To disable this
feature, when the prompt for “Enter Code” displays, enter 87, display shows function.
Step 4) After Hours Mode Code 81 ON or Code 80 OFF
To enable After Hours Mode, enter programming: when the prompt for “Enter Code”
displays, enter 81, display shows function. To turn this feature Off, when the prompt
for “Enter Code” displays enter 80, display shows function. Note: To enable After
Hours Mode you must first enter Start and End times (above) and day periods (M-S).
Display All Operating Codes Code 92
Press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays, enter 92 to see the
current settings. The factory default list is Pg1: 16, 28, 30, 46, 48, 59, Pg2: 70,
73, 75, 77, 80, 85, Pg3: 87, L1, 96, 66, 95, 03. These codes can change when
the user enables alternate settings.
VoIP Time Option Code 95 - Manually Set Clock and Date
The date and time are determined by your local phone service automatically, but you
can manually set it for use with VoIP phone services. Press and hold the Program
Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the
prompt for “Enter Code” displays, enter 95 followed by the year in two digits, the
month in two digits, the day in two digits and the (Military) time in 4 digits.
Example, 95 20 05 28 1425 * or 95 + Year 20 + Month 05 + Day 28 + Mil Time 1425
(2:25PM) + * key to store. The display will show the new Time and Date changed
immediately after you hang up and for each call thereafter. To return to factory setting
of Automatic Date & Time from your phone company, enter 95 # *.
To Next Page
Loading...
