DigiTrak Falcon F2 Quick Start Guide

- 1 -
© 2016 Digital Control Incorporated, Oct
All rights reserved. 402-1021-21-C metric
www.DigiTrak.com
Falcon F2
®
Quick Start Guide
1. IRport2. Trigger
Power On Receiver
1. Install battery and click trigger to power on the
receiver.
2. Ensure the region number in the globe icons on
the startup screen and transmitter match.
3. Click the trigger to reach the Locate screen.
Receiver Locate Screen
1. Locate point (ball)
2. Receiver
3. Roll indicator
4. Roll/pitch update meter
5. Transmitter (Tx) pitch
6. Tx signal strength
7. Tx temperature
Transmitter and receiver must be Paired before data will display (page 3).
Receiver Main Menu
Click to open the Main menu. Click between menu options, hold briefly
and release to select.
1. Telemetry channel
2. Frequency band
3. Battery strength
4. Frequency Optimizer
5. Power off
6. HAG
7. Calibration
8. Settings
9. Target depth
10. Target Steering
For DigiTrak remote displays, see separate manual or Quick Start Guide.

DigiTrak Falcon F2 Specifications

General

Brand	DigiTrak
Model	Falcon F2
Category	Test Equipment
Language	English