To Next PageTo Next Page
Need help?Do you have a question about the Digitrax DT602 and is the answer not in the manual?
Details the DT602's LCD screen layout, Home screen, and power saver features.
Guide on selecting a locomotive by its address and initiating operation.
Introduction to MUing locomotives, including adding and removing units.
How to operate locomotive functions F0 through F9 using the DT602 keypad.
Guides on accessing and controlling functions F10 through F28.
Overview of decoder programming methods: Mainline and Service Mode.
How to read, write, and troubleshoot Configuration Variables (CVs).
Accesses Utility tasks like Soft Clear, Fast Clock editor, and Options Editor.
Instructions to immediately stop all operations on the layout by turning off track power.
How to perform an emergency stop on an active locomotive controlled by a specific throttle knob.
Details how to set the track voltage for the DCS210+ for different scales.
General
